WattList may earn a commission if you buy through links on this page, at no extra cost to you. Rankings are not for sale. Samples are disclosed when a brand provided the unit.
The BLUETTI Apex 200 is a 2,560 Wh lithium iron phosphate (LiFePO4) power station rated for 3,200 W of continuous AC output. It weighs 59.3 lb, has a TT-30R outlet for RVs, takes up to 3,000 W of solar and can add up to six expansion batteries. BLUETTI’s Super Early-Bird price is $1,099 through Nov 18, or $1,044.05 with code watt5.
This is a launch first look built from BLUETTI’s product page and user manual. Every runtime below is planning math based on BLUETTI’s specs.
Quick specs
| BLUETTI Apex 200 spec | BLUETTI’s number | Source |
|---|---|---|
| Capacity | 2,560 Wh (51.2 V, 50 Ah) | Apex 200 user manual (linked from the product page) |
| Battery chemistry | LiFePO4 | bluettipower.com Apex 200 product page |
| Cycle life | 6,000+ cycles to 70% of original capacity (BLUETTI lab testing) | bluettipower.com Apex 200 product page |
| Continuous AC output | 3,200 W; up to 3,600 W with an expansion battery or active AC or solar input | bluettipower.com Apex 200 product page; Apex 200 user manual (linked from the product page) |
| Surge (single unit) | 3,360 to 3,840 W for 2 minutes; 3,840 to 4,800 W for 10 seconds; 4,800 W and up for 0.5 seconds | Apex 200 user manual (linked from the product page) |
| Power Lifting mode | Up to 5,400 W for resistive loads like kettles and hair dryers; real output stays 3,200 W | Apex 200 user manual (linked from the product page) |
| AC outlets | 3 x NEMA 5-20R (20 A each), 1 x NEMA TT-30R (30 A), 1 x P050A AC input/output port | Apex 200 user manual (linked from the product page) |
| DC outlets | 1 x 140 W USB-C, 1 x 100 W USB-C, 2 x 15 W USB-A, 1 x 12 V/10 A car outlet (120 W), 1 x 12 V/30 A Anderson (360 W); 500 W DC total | Apex 200 user manual (linked from the product page) |
| AC charging | 1,800 W on the included 15 A cable; up to 3,200 W in Turbo mode with an optional TT-30P or 14-50P to P050A cable, 80% in about 45 minutes at 77°F | Apex 200 user manual (linked from the product page) |
| Solar input | 3,000 W total: 2,000 W on MC4 (60 to 280 V, 16 A) plus 1,000 W on XT60 (12 to 60 V, 25 A); 80% in about 50 minutes, full in about 1.7 hours (BLUETTI testing) | bluettipower.com Apex 200 product page; Apex 200 user manual (linked from the product page) |
| Car charging | 96 W from a 12 V socket, 192 W from 24 V | Apex 200 user manual (linked from the product page) |
| Max AC plus solar input | 3,200 W (4,600 W with an expansion battery) | bluettipower.com Apex 200 product page; Apex 200 user manual (linked from the product page) |
| Expansion | Up to 6 x B300K or B500K per unit, 33,280 Wh max; up to 99.84 kWh with three units, Hub A1 and 18 B500K | bluettipower.com Apex 200 product page; Apex 200 user manual (linked from the product page) |
| Backup switchover | 15 milliseconds or less | bluettipower.com Apex 200 product page; Apex 200 user manual (linked from the product page) |
| Weight | 59.3 lb (26.9 kg) | bluettipower.com Apex 200 product page; Apex 200 user manual (linked from the product page) |
| Size | 20.67 x 12.87 x 8.31 in (525 x 327 x 211 mm) | bluettipower.com Apex 200 product page; Apex 200 user manual (linked from the product page) |
| Noise | 50 dB max | bluettipower.com Apex 200 product page; Apex 200 user manual (linked from the product page) |
| Operating temps | Charge 32 to 104°F; discharge -4 to 104°F | bluettipower.com Apex 200 product page |
| Water and dust rating | IP20 (indoor use) | Apex 200 user manual (linked from the product page) |
| App | Wi-Fi and Bluetooth; outlet control, schedules, time-of-use charging, severe weather alerts; works with Alexa, Google Home and Home Assistant | bluettipower.com Apex 200 product page; Apex 200 user manual (linked from the product page) |
| Certifications listed | FCC, “UL Standard”, TELEC, CE, NTC, RCM, LOA, ICASA (no specific UL standard number given) | bluettipower.com Apex 200 product page |
| Warranty | 5 years | bluettipower.com Apex 200 product page |
| In the box | Apex 200, 1.5 m AC charging cable, grounding screw, quick start guide and warranty card | bluettipower.com Apex 200 product page |
One note on outlets. The spec table on BLUETTI’s product page lists 4 AC outlets and a NEMA 14-50R (120/240 V) outlet. That matches the Apex 300 spec table, while BLUETTI’s own photos and the Apex 200 manual show 3 standard outlets plus a TT-30R, with 14-50 appearing only as an optional charging cable plug. The manual lists every AC port at 120 V. We went with the manual. If you need 240 V, plan on the Apex 300 or a different system.
Launch price timeline
BLUETTI shared this schedule with WattList. The watt5 code takes 5% off the station price.
| Phase | Dates | BLUETTI Apex 200 price | With code watt5 |
|---|---|---|---|
| Super Early-Bird | Nov 4 to Nov 18 | $1,099 | $1,044.05 |
| Early Bird | Nov 19 to Nov 30 | $1,149 | $1,091.55 |
| Launch Price | Dec 1 to Dec 5 | $1,199 | $1,139.05 |
At $1,099 that works out to about 43 cents per watt-hour, or 41 cents with watt5. The current Apex 300 price of $1,499 is about 54 cents per watt-hour.
Who the Apex 200 is for
- Home backup for essentials. A fridge, Wi-Fi, lights, phones and a CPAP fit easily inside 3,200 W. The 2,560 Wh battery gets most homes through about a day of that, and you can add a battery later.
- RV owners on a 30 A rig. The TT-30R outlet plugs a 30 A RV cord straight in, and the 12 V/30 A Anderson port can feed 12 V gear like a fridge or water pump.
- Solar users. 3,000 W of input across two ports is a lot for a station this size. The 60 to 280 V MC4 range lets you wire panels in series.
- People who might grow the system. Six expansion batteries per unit, and up to three units through Hub A1, means you can start with one box.
Who should skip it
- Anyone who needs 240 V for a well pump, dryer or a 240 V home circuit. The manual lists 120 V only.
- Anyone who wants a station to carry around a campsite. At 59.3 lb it is a two-hand lift. BLUETTI sells a foldable trolley.
- Outdoor use in rain. It is rated IP20.
Planning math: how long will it run?
These are estimates based on BLUETTI’s specs. We assume 85 to 90% of the 2,560 Wh rating is usable after inverter losses, which is 2,176 to 2,304 Wh. BLUETTI does not publish an idle draw for the inverter, and small loads on AC lose more to that overhead, so light-load runtimes may come in lower. Load figures come from our fridge, Wi-Fi and CPAP sizing guide and our sump pump guide.
| Load | Typical draw | BLUETTI Apex 200 (2,176 to 2,304 Wh usable) | BLUETTI Apex 200 + B300K (5,325 Wh rated, 4,526 to 4,792 Wh usable) |
|---|---|---|---|
| Full-size fridge | 1 to 2 kWh a day | About 26 to 55 hours | About 2.3 to 4.8 days |
| CPAP, no heated humidifier | 30 to 60 W | About 36 to 77 hours, or 4.5 to 9.5 eight-hour nights | About 9 to 20 eight-hour nights |
| Modem plus router | 15 to 20 W | About 4.5 to 6 days | About 9 to 13 days |
| 1/2 horsepower sump pump, steady rain (25% duty) | About 270 W average | About 8 hours | About 17 to 18 hours |
| 1/2 horsepower sump pump, storm (50% duty) | About 540 W average | About 4 hours | About 8 to 9 hours |
| Fridge, Wi-Fi and one CPAP night together | 1.6 to 3 kWh a day | About 18 to 35 hours | About 1.5 to 3 days |
On sump pumps, the bigger question is starting draw. Our sump pump guide lists 2,645 W at startup for a 1/2 horsepower Liberty 280 and 2,760 W for a 3/4 horsepower Liberty 290. Both sit under the Apex 200’s 3,200 W continuous rating, so on paper it starts either one. Leave ECO mode off for a sump pump. It is off by default, and when on it can shut off AC output after a stretch of low load, like the quiet time between pump cycles.
Apex 200 vs Apex 300
The Apex 300 is the bigger sibling. The two share the same footprint, but the Apex 300 is 4.3 inches taller and about 24 lb heavier.
| Spec | BLUETTI Apex 200 | BLUETTI Apex 300 |
|---|---|---|
| Price on Nov 4 | $1,099 Super Early-Bird ($1,044.05 with watt5) | $1,499 (crossed-out $1,699) |
| Capacity | 2,560 Wh | 2,764.8 Wh |
| Continuous AC output | 3,200 W (3,600 W with expansion battery) | 3,840 W |
| Power Lifting | 5,400 W | 7,680 W |
| Voltage | 120 V | 120 V/240 V listed |
| Built-in USB and 12 V ports | Yes: 2 USB-C, 2 USB-A, car outlet, Anderson | No, needs the Hub D1 add-on |
| Solar input | 3,000 W (2,000 W MC4 at 60 to 280 V + 1,000 W XT60) | 2,400 W (2 x 1,200 W, 12 to 60 V) |
| Fastest AC charging | 3,200 W Turbo, 80% in about 45 min | 3,840 W Turbo, 80% in 45 min |
| Cycle rating | 6,000+ to 70% capacity | 6,000+ to 80% capacity |
| Weight | 59.3 lb | 83.78 lb |
| Size | 20.67 x 12.87 x 8.31 in | 20.67 x 12.87 x 12.6 in |
| Expansion | Up to 6 x B300K or B500K | Up to 6 x B300K, B300S or B300 |
| Warranty | 5 years | 5 years |
For most people backing up a fridge, internet and medical gear, the Apex 200 covers the job for $400 less and is far easier to move. The Apex 300 makes more sense if you need 240 V or want more than 3,200 W from a single box. Note that BLUETTI rates the Apex 200’s cycle life to 70% capacity and the Apex 300’s to 80%, so the two cycle numbers are not a like-for-like comparison. The Apex 200 manual also says an Apex 300 can connect to an Apex 200 as an expansion battery, which helps if you already own one.
Want a primer on why LiFePO4 matters for a backup battery? See our LiFePO4 vs NMC guide.
FAQ
Can the Apex 200 run a refrigerator?
Yes. A typical fridge uses 1 to 2 kWh a day, so the Apex 200 should run one for roughly 26 to 55 hours by our math, longer with an expansion battery.
Will it start a sump pump?
On paper, yes for 1/2 and 3/4 horsepower pumps. Their startup draw in our sump pump guide is about 2,645 to 2,760 W, under the 3,200 W continuous rating. Test it with your own pump before a storm.
Does the Apex 200 have 240 V?
No, based on the user manual, which lists 120 V for every AC port. BLUETTI’s product page spec table mentions a 120/240 V 14-50R outlet, which matches the Apex 300’s spec table. We followed the manual.
How fast does it charge from a wall outlet?
Up to 1,800 W on the included cable. With an optional TT-30P or 14-50P to P050A cable and Turbo mode, up to 3,200 W, and BLUETTI says 80% in about 45 minutes at 77°F.
Can I connect it to my house?
BLUETTI sells home backup kits and the Hub A1 for multi-unit setups. Any connection to home wiring through an inlet or transfer switch should be installed by a licensed electrician. For a simpler apartment setup, see our apartment blackout guide.
When does the launch price end?
Super Early-Bird runs through Nov 18 at $1,099. Early Bird is $1,149 from Nov 19 to 30, and the Launch Price is $1,199 from Dec 1 to 5. Code watt5 takes 5% off each.
Bottom line
On paper, the BLUETTI Apex 200 is a strong home and RV backup box: 2,560 Wh, 3,200 W, an RV outlet, 3,000 W of solar and room to grow, at 59.3 lb. The $1,099 Super Early-Bird price undercuts the Apex 300 by $400. Skip it if you need 240 V.
Shop: BLUETTI Apex 200 at BLUETTI (code watt5 for 5% off)
Prices and specs checked on bluettipower.com on Nov 4, 2026. Launch pricing from BLUETTI. Runtime figures are planning estimates based on BLUETTI’s specs.
Leave a Reply